FC2

The Drive for High-Speed Applications

The Interfaces of FC2

24 V Logic supply
Parametrerization and diagnosis
Rstart Lock
Spindle selection
Analog reference speed value
Triggering of the contactors for the spindle selection
Digital inputs and outputs
12 x Temperature sensor (PTC/NTC)
12 x speed sensor
200 V - 480 V Mains supply
Motor connection0 V - 220 V
SERVOLINK 4

Software for Initial Operation and Parameterization:
drivemaster2

The software drivemaster2 allows comfortable parameterization of the frequency converter and provides interactive assistance for the initial operation.

The integrated 4-channel oscilloscope allows monitoring and optimizing the spindle‘s behavior during operation.

Optimizing the controller and analyzing measured values is done with the help of clear diagrams allowing easy com- prehension of the frequency converter‘s behavior.

Parameterizing the characteristic curve of the motor is done with graphic support. The required current is adapted dynamically in dependance on the number of active spindles.

The tool for initial operation allows operating and optimizing the frequency converter in real applications.

Technical Specifications of FC2

1-phase supply

230 V Mains supply (AC)
3.2 kVA	I_r: 8.2 A	I_p: 12,6 A	320 x 150 x 160 mm

3-phase supply

480 V Mains supply(AC)
13 kVA	I_r: 33.6 A	I_p: 50.4 A	320 x 200 x 220 mm

Ir = rated current, Ip = peak current. Stated currents are rms values.
Voltage limits at 230 V: 230 V -15% / +10%
Voltage limits at 480 V: 200 V -10% up to 480 V +10%
The device dimensions are defi ned as height x width x depth, related to the mounting dimensions.

Brochure Download

FC2_e_Rev03_web.pdf (392.4 kB)

Errors and omissions excepted.

FC2